| SPECIFICATIONS: | AT-10 | AT-20 | AT-25 | AT-35 |
| Floor Space | 31"W X 56"L X 37"H | 37"W X 80"L X 44"H | 37"W X 80"L X 50"H | 48"W X 78": X 50"H |
| Inside Tank | 24"W X 36"L X 20"H | 30"W X 48"L X 24"H | 30"W X 48"L X 30"H | 36"W X 60"L X 30"H |
| Loading Height | 29" | 37" | 42" | 42" |
| Solvent Depth | 18" | 21" | 27" | 27" |
| Solution Capacity | 100 gallons | 200 gallons | 250 gallons | 350 gallons |
| Tank Construction | 12 gauge | 12 gauge | 12 gauge | 10 gauge |
| Grate Construction | 1/2" rod x 1/4" X 3/4" flat | 9/16" rod x 1/4" X 3/4" flat | 9/16" rod x 1/4" X 3/4" flat | 5/8" rod x 1/4" X 3/4" flat |
| Insulation-1" fiberglass | R rating of 3.9 | R rating of 3.9 | R rating of 3.9 | R rating of 3.9 |
| Insulation Covering | 16 gauge | 16 gauge | 16 gauge | 16 gauge |
| Electric Heater | 5 KW-230V, 1 PH | 12 KW-240V, 3 PH | 12 KW-240V, 3 PH | 18 KW-240V, 3 PH |
| Heater Amperage Draw | 21 Amps- Single Phase | 29 Amps- 3 phase | 29 Amps- 3 phase | 44 Amps- 3 phase |
| Gas Burner | n/a | 8500 BTU | 8500 BTU | 125,000 BTU |
| MOTOR SIZE | 1 HP= 110 VOLT | 1 hp 230v 3 PHASE | 1 hp 230v 3 PHASE | 2 hp 230v 3 PHASE |
| MOTOR AMP DRAW | 10.8 amps | 7.3 amps | 7.3 amps | 8.0 amps |
| Agitation Pump | one | one | one | two |
| Drain Valve | 1 1/4" | 2" | 2" | 2" |
| Shipping Weight | 285 LBS | 550 LBS | 650 LBS | 1050 LBS |
| OPTIONS | ||||
| 240 Single Phase Power | ||||
| Electric Heater- 1 Phase | 12 KW- 52 amps | 12 KW- 52 amps | 18 KW= 75 amps | |
| Motor Specs. 1 phase | 1 hp = 7.0 amps | 1 hp = 7.0 amps | 2 hp= 9.0 amps | |
| 7-Day Timer | 7-D | 7 Lbs | ||
| Hoist | H-10 | 55 LBS | ||
| Hoist (Telescopic Boom) | H-20 | 110 LBS | ||
| Hoist (Telescopic Boom) | H-25 | 110 LBS | ||
| Hoist (Telescopic Boom) | H-35 | 140 LBS | ||
|
Basket with Lift Bar 22"W X 28"L X 8"D 22"W X 34"L X 8"D |
B-28 B-34 |
50 LBS 60 LBS |
||
|
Hand Basket 8"W X 12"L X 12"D |
HB | 10 LBS | ||